6
Yes
None
1
1000000
/products/
Tension Machines
Our tension machines are complete systems with a 20ft connection developed on the basis of practical experience. Transport is easily possible on any trailer using twist locks. Fork pockets and various lifting points allow easy movement of the machines. The spooling machines are easy to operate using either the remote control or directly on the control panel inside. Multiple reel shaft diameters and a movable second bearing point allow use in various applications with both tension and constant tension. Our systems are designed in compliance with offshore quality requirements.
Special Machines
Our Tension and Winding Solutions go further than just tensioning machines and winches. TWS stands for the total process of controlled winding and unwinding. This includes reel guiding systems, capstans and (wire) rope guiding systems. TWS works together with you to find the best solution for your project. At TWS we do more than standard applications alone. Our systems can be adapted to suit your specific wishes, up to and including complete winding solutions.
Winches
Our winches are designed for use in the industrial and offshore market: they are robust, well-built, easy to use and safe. The winches shown on this page are electrically powered but are also available in hydraulic and pneumatic versions. These offer the same working loads and capabilities. All our winches are supplied with control units (frequency controlled if desired), overload and temperature protection. Our winches are designed in compliance with offshore quality requirements.
Maintenance and testing
In addition of rental winchsystems, TWS offers the possibility of complete overhaul / maintenance of winchsystems. TWS is also capable of testing winchsystems prior or subsequent to the maintenance on our dynamic test facility. TWS has a dynamic test facility with a maximum load of 1400kN.
Tension Machines
Our tension machines are complete systems with a 20ft connection developed on the basis of practical experience. Transport is easily possible on any trailer using twist locks. Fork pockets and various lifting points allow easy movement of the machines. The spooling machines are easy to operate using either the remote control or directly on the control panel inside. Multiple reel shaft diameters and a movable second bearing point allow use in various applications with both tension and constant tension. Our systems are designed in compliance with offshore quality requirements.
TEH8C (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Infof
TEH15C
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Infof
TEH30C (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Infof
TEH60L
- Fully electrically powered
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Infof
TRS350
- Adjustable for various reel sizes
- Transportable within 40ft size
- Equipped with lifting eyes and fork sleeves
Infof
TEH90L (NEW)
- Fully electrically powered
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Infof
TEH8L (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Infof
TEH1S (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Infof
Special Machines
Our Tension and Winding Solutions go further than just tensioning machines and winches. TWS stands for the total process of controlled winding and unwinding. This includes reel guiding systems, capstans and (wire) rope guiding systems. TWS works together with you to find the best solution for your project. At TWS we do more than standard applications alone. Our systems can be adapted to suit your specific wishes, up to and including complete winding solutions.
UNIVERSAL BAR GUIDE (NEW) TEL5000
- Easy to connect to any type of winch or reel machine
- Equipped with speed and length readout
- Suitable for cable in the range of Ø28 - 100mm
- Can withstand high transverse forces
Infof
Capstan
Reel machine
TRACTION WINCH
TEC12000 (NEW)
- Dyneema pull-in winch for offshore applications
- Nominal 10mT @ 5m/min
- Peak 12mT @ 4m/min (short period)
- High speed 2mT @t 10 m/min
- Cable is wrapped around the head for a few turns
- Hanging and standing position during operation with central fleeting position
- Load measurement and load limiting on big touch screen
- Datalogging
- Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
- Automatic constant tension cable puller for safer pulling operation
Infof
TEC20000 (NEW)
- Dyneema pull-in winch for offshore applications
- Nominal 15mT @ 6m/min
- Peak 20mT @ 4m/min (1 min)
- High speed 4mT @t 10 m/min
- Cable is wrapped around the head for a few turns
- Hanging and standing position during operation with central fleeting position
- Load measurement and load limiting on big touch screen
- Datalogging
- Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
- Automatic constant tension cable puller for safer pulling operation
Infof
TEC8000 (NEW)
- Dyneema pull-in winch for offshore applications
- Nominal 8mT @ 5m/min
- Peak 10mT @ 4m/min (short period)
- High speed 2mT @t 10 m/min
- Cable is wrapped around the head for a few turns
- Hanging and standing position during operation with central fleeting position
- Load measurement and load limiting on big touch screen
- Datalogging
- Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
- Automatic constant tension cable puller for safer pulling operation
Infof
Winches
Our winches are designed for use in the industrial and offshore market: they are robust, well-built, easy to use and safe. The winches shown on this page are electrically powered but are also available in hydraulic and pneumatic versions. These offer the same working loads and capabilities. All our winches are supplied with control units (frequency controlled if desired), overload and temperature protection. Our winches are designed in compliance with offshore quality requirements.
TEW1500 (NEW)
- Heavy Duty frame with lifting points
- Suitable as an auxiliary winch for offshore wind projects
- Frequency controlled control
- When used as a pull winch, WLL is 2000kg
Infof
TEW3500 (NEW)
- Heavy Duty frame with lifting points
- Offshore protection class IP56
- Lifting and lowering with same power
- Frequency controlled
- Spindle limit switch (option)
- Pressure roller (option)
- When used as a pull winch, WLL is 4000kg
Infof
TEW5000 (NEW)
- Heavy Duty frame complete with lifting eyes and fork sleeves
- Accurate Constant Tension
- Variable speed
- When used as a pull winch, WLL is 6.430kg
Infof
TEW5000CT (CONSTANT TENSION)
- Heavy Duty frame complete with lifting eyes and fork sleeves
- Accurate Constant Tension
- Variable speed
- When used as a pull winch, WLL is 6.430kg
Infof
TEW6000
- Solid frame complete with lifting eyes and fork sleeves
- Frequency controlled control
- Constant tension
- When used as a pull winch, WLL is 7,500kg
Infof
TEW10000 (NEW)
- Solid frame complete with lifting eyes and fork pockets
- Frequency controlled control
- When used as a pull winch, WLL is 12000kg
Infof
TEW15000
- Cable Pull-In Winch for Offshore applications
- Solid frame complete with lifting eyes and fork sleeves
- Suitable for 3-Ph 400-480V 50-60Hz 16 - 63A
- When used as a pull winch, WLL is 20,000kg
- Optionally provided with bar guide and reading
Infof
TEW30000
The TEW30000 is an electrically powered mooring winch on a heavy duty frame with fixture holes. Frequency drive control, overload protection, temperature monitoring and standstill heating are standard.
The drum have a clutch for disconnecting the drum during the operation of the brake band. By using the band brake the loads can be lowered in a controlled and rapid manner. The maximum holding power of the winch on the band brake is 85.000 kg. The band brake can only be used for one direction.
The maximum electrical pulling force can be set with the torque potentiometer, maximum 30.000kg. When the pulling force in the wire rope reach the set point the winch stops rotating and keeps the pulling force in the wire rope.
DESIGN, FABRICATION AND FAT APPROVED BY DNV.
Infof
TEW30000D
The TEW30000D is an electrically powered mooring winch on a heavy duty frame with fixture holes. Frequency drive control, overload protection, temperature monitoring and standstill heating are standard. Both drum have clutches and brandbrakes for pulling independently operating the drums. By using the band brakes the loads can be lowered in a controlled and rapid manner. The maximum holding power of the winch on each band brake is 85.000 kg. The band brake can only be used for one direction. The 15 tons warping head has a fixed connection to the main shaft. To use the warping head the drums have to be disengaged.
The maximum electrical pulling force can be set with the torque potentiometer, maximum 30.000kg. When the pulling force in the wire rope reach the set point the winch stops rotating and keeps the pulling force in the wire rope.
DESIGN, FABRICATION AND FAT APPROVED BY DNV.
Infof
TEW10000S
- Solide frame complete with lifting eyes and fork sleeves
- Frequency controlled control
- When used as a pull winch, WLL is 13000kg
Infof
TEW15000CT (CONSTANT TENSION)
- Cable Pull-In Winch for Offshore applications
- Solid frame complete with lifting eyes and fork pockets
- Suitable for 3-Ph 400-480V 50-60Hz 16 - 63A
- Constant Tension in range of 1000 - 20.000kg
- Accurate Constant Tension in both directions
- Tension force reading on controlbox based on motortorque
- Optionally provided with levelwinder with length reading
Infof
TEW10000CT (CONSTANT TENSION)
- Solid frame complete with lifting eyes and fork pockets
- Frequency controlled control
- Constant Tension in range of 1000 - 12.000kg
- Accurate Constant Tension in both directions
- Tension force reading on controlbox based on motortorque
- Optionally provided with levelwinder with length reading
Infof
Maintenance and testing
In addition of rental winchsystems, TWS offers the possibility of complete overhaul / maintenance of winchsystems. TWS is also capable of testing winchsystems prior or subsequent to the maintenance on our dynamic test facility. TWS has a dynamic test facility with a maximum load of 1400kN.
TRACTION WINCH SYSTEEM 40 TONS
Tension Machines
Our tension machines are complete systems with a 20ft connection developed on the basis of practical experience. Transport is easily possible on any trailer using twist locks. Fork pockets and various lifting points allow easy movement of the machines. The spooling machines are easy to operate using either the remote control or directly on the control panel inside. Multiple reel shaft diameters and a movable second bearing point allow use in various applications with both tension and constant tension. Our systems are designed in compliance with offshore quality requirements.
TEH8C (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Download: TEH8C-2021-02.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750
TEH15C
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Download: TEH15C-2021-02.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750, 2000
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750, 2000
TEH30C (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Download: TEH30C-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80, 100
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750, 2000, 3400
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80, 100
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15
Max reel diameter (mm): 2500
Max reel width (mm): 1750, 2000, 3400
TEH60L
- Fully electrically powered
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Download: TEH60L-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15, 60
Max reel diameter (mm): 2500, 4000
Max reel width (mm): 1750, 2000, 3400
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 15, 60
Max reel diameter (mm): 2500, 4000
Max reel width (mm): 1750, 2000, 3400
TRS350
Adjustable for various reel sizes
Transportable within 40ft size
Equipped with lifting eyes and fork sleeves
Download: TRS350-2021-01.pdf
Drive: Electric
Max reel weight (tons): 15, 60, 350
Max reel diameter (mm): 2500, 4000, 9000
Max reel width (mm): 1750, 2000, 3400, 7600
Drive: Electric
Max reel weight (tons): 15, 60, 350
Max reel diameter (mm): 2500, 4000, 9000
Max reel width (mm): 1750, 2000, 3400, 7600
TEH90L (NEW)
- Fully electrically powered
- Very accurately adjustable preload
- Data logging bias
- Equipped with welding plates to weld on deck, for example
Download: TEH90L-2024-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 8, 15, 30, 60, 90
Max reel diameter (mm): 2500, 4000
Max reel width (mm): 1750, 2000, 3400
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 8, 15, 30, 60, 90
Max reel diameter (mm): 2500, 4000
Max reel width (mm): 1750, 2000, 3400
TEH8L (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Download: TEH8L-2024-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 4, 8
Max reel diameter (mm): 2500
Max reel width (mm): 1500, 1750
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 4, 8
Max reel diameter (mm): 2500
Max reel width (mm): 1500, 1750
TEH1S (NEW)
- Compact design and low own weight
- Suitable for indoor use
- Very accurately adjustable pre-tension
Download: TEH1S-LEGO-2024-01.pdf
Drive: Electric
Max pulling force (tons): 1
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 4
Max reel diameter (mm): 2000
Max reel width (mm): 1500
Drive: Electric
Max pulling force (tons): 1
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Max reel weight (tons): 4
Max reel diameter (mm): 2000
Max reel width (mm): 1500
Special Machines
Our Tension and Winding Solutions go further than just tensioning machines and winches. TWS stands for the total process of controlled winding and unwinding. This includes reel guiding systems, capstans and (wire) rope guiding systems. TWS works together with you to find the best solution for your project. At TWS we do more than standard applications alone. Our systems can be adapted to suit your specific wishes, up to and including complete winding solutions.
UNIVERSAL BAR GUIDE (NEW) TEL5000
Easy to connect to any type of winch or reel machine
Equipped with speed and length readout
Suitable for cable in the range of Ø28 - 100mm
Can withstand high transverse forces
Download: TEL5000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80, 100
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20, 30, 80, 100
Capstan
Horizontal movement of load
Cable is wrapped around the head for a few turns
Vertical version also possible
Please contact for more information.
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max pulling force (tons): 1, 2, 4, 5
Reel machine
For winding and rinsing (steel) cable
Very compact construction
Also available with intermediate flange
Please contact for more information.
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6
Max speed (m/min): 5, 6, 10, 11, 12
Max pulling force (tons): 1, 2, 4, 5, 6
Max speed (m/min): 5, 6, 10, 11, 12
TRACTION WINCH
Horizontal movement of workload
Infinite cable lengths possible
Can be used as a torque multiplier
Please contact for more information
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
TEC12000 (NEW)
Dyneema pull-in winch for offshore applications
Nominal 10mT @ 5m/min
Peak 12mT @ 4m/min (short period)
High speed 2mT @t 10 m/min
Cable is wrapped around the head for a few turns
Hanging and standing position during operation with central fleeting position
Load measurement and load limiting on big touch screen
Datalogging
Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
Automatic co... Info
Download: TEC12000-2022-02.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
TEC20000 (NEW)
Dyneema pull-in winch for offshore applications
Nominal 15mT @ 6m/min
Peak 20mT @ 4m/min (1 min)
High speed 4mT @t 10 m/min
Cable is wrapped around the head for a few turns
Hanging and standing position during operation with central fleeting position
Load measurement and load limiting on big touch screen
Datalogging
Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
Automatic constant ... Info
Download: TEC20000-2024-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
TEC8000 (NEW)
Dyneema pull-in winch for offshore applications
Nominal 8mT @ 5m/min
Peak 10mT @ 4m/min (short period)
High speed 2mT @t 10 m/min
Cable is wrapped around the head for a few turns
Hanging and standing position during operation with central fleeting position
Load measurement and load limiting on big touch screen
Datalogging
Powersupply 3-Ph 400-480V 50-60Hz 16 - 32A
Automatic con... Info
Download: TEC12000-2022-02.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500, 3000
Winches
Our winches are designed for use in the industrial and offshore market: they are robust, well-built, easy to use and safe. The winches shown on this page are electrically powered but are also available in hydraulic and pneumatic versions. These offer the same working loads and capabilities. All our winches are supplied with control units (frequency controlled if desired), overload and temperature protection. Our winches are designed in compliance with offshore quality requirements.
TEW990
Provided with mounting holes
Choice of relay control or frequency controlled
Download: TEW990-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2
Max speed (m/min): 5, 6
Max wire storage (m): 100
Drive: Electric
Max pulling force (tons): 1, 2
Max speed (m/min): 5, 6
Max wire storage (m): 100
TEW1500 (NEW)
Heavy Duty frame with lifting points
Suitable as an auxiliary winch for offshore wind projects
Frequency controlled control
When used as a pull winch, WLL is 2000kg
Download: TEW1500-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100
Drive: Electric
Max pulling force (tons): 1, 2
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100
TEW3500 (NEW)
Heavy Duty frame with lifting points
Offshore protection class IP56
Lifting and lowering with same power
Frequency controlled
Spindle limit switch (option)
Pressure roller (option)
When used as a pull winch, WLL is 4000kg
Download: TEW3500-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11
Max wire storage (m): 100, 150, 250
Drive: Electric
Max pulling force (tons): 1, 2, 4
Max speed (m/min): 5, 6, 10, 11
Max wire storage (m): 100, 150, 250
TEW5000 (NEW)
Heavy Duty frame complete with lifting eyes and fork sleeves
Accurate Constant Tension
Variable speed
When used as a pull winch, WLL is 6.430kg
Download: TEW5000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100, 150, 250, 350, 450
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100, 150, 250, 350, 450
TEW5000CT (CONSTANT TENSION)
Heavy Duty frame complete with lifting eyes and fork sleeves
Accurate Constant Tension
Variable speed
When used as a pull winch, WLL is 6.430kg
Download: TEW5000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100, 150, 250, 350, 450, 500
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5
Max speed (m/min): 5, 6, 10, 11, 12
Max wire storage (m): 100, 150, 250, 350, 450, 500
TEW6000
Solid frame complete with lifting eyes and fork sleeves
Frequency controlled control
Constant tension
When used as a pull winch, WLL is 7,500kg
Download: TEW6000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7
Max speed (m/min): 5, 6, 10, 11
Max wire storage (m): 100, 150, 250, 350, 450, 500
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7
Max speed (m/min): 5, 6, 10, 11
Max wire storage (m): 100, 150, 250, 350, 450, 500
TEW10000 (NEW)
Solid frame complete with lifting eyes and fork pockets
Frequency controlled control
When used as a pull winch, WLL is 12000kg
Download: TEW10000-2023-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13
Max wire storage (m): 100, 150, 250
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13
Max wire storage (m): 100, 150, 250
THW12000
Hydraulic pull winch
Very compact construction
Equipped with fail safe brake
Download: THW12000-2021-01.pdf
Drive: Hydraulic
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20
Max wire storage (m): 100, 150
Drive: Hydraulic
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13, 20
Max wire storage (m): 100, 150
TEW15000
Cable Pull-In Winch for Offshore applications
Solid frame complete with lifting eyes and fork sleeves
Suitable for 3-Ph 400-480V 50-60Hz 16 - 63A
When used as a pull winch, WLL is 20,000kg
Optionally provided with bar guide and reading
Download: TEW15000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350
TEW30000
The TEW30000 is an electrically powered mooring winch on a heavy duty frame with fixture holes. Frequency drive control, overload protection, temperature monitoring and standstill heating are standard.
The drum have a clutch for disconnecting the drum during the operation of the brake band. By using the band brake the loads can be lowered in a controlled and rapid manner. The maximum holding power of the winch on the band brake is 85.000 kg. The band brake can on... Info
Download: TEW30000-2022-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500
TEW30000D
The TEW30000D is an electrically powered mooring winch on a heavy duty frame with fixture holes. Frequency drive control, overload protection, temperature monitoring and standstill heating are standard. Both drum have clutches and brandbrakes for pulling independently operating the drums. By using the band brakes the loads can be lowered in a controlled and rapid manner. The maximum holding power of the winch on each band brake is 85.000 kg. The band brake can only be used for one ... Info
Download: TEW30000D-2022-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350, 450, 500
TEW10000S
Solide frame complete with lifting eyes and fork sleeves
Frequency controlled control
When used as a pull winch, WLL is 13000kg
Download: TEW10000S-2022-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6
Max wire storage (m): 100, 150, 250
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6
Max wire storage (m): 100, 150, 250
TEW15000CT (CONSTANT TENSION)
Cable Pull-In Winch for Offshore applications
Solid frame complete with lifting eyes and fork pockets
Suitable for 3-Ph 400-480V 50-60Hz 16 - 63A
Constant Tension in range of 1000 - 20.000kg
Accurate Constant Tension in both directions
Tension force reading on controlbox based on motortorque
Optionally provided with levelwinder with length reading
Download: TEW15000-2021-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20
Max speed (m/min): 5, 6, 10
Max wire storage (m): 100, 150, 250, 350
TEW10000CT (CONSTANT TENSION)
Solid frame complete with lifting eyes and fork pockets
Frequency controlled control
Constant Tension in range of 1000 - 12.000kg
Accurate Constant Tension in both directions
Tension force reading on controlbox based on motortorque
Optionally provided with levelwinder with length reading
Download: TEW10000-2023-01.pdf
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13
Max wire storage (m): 100, 150, 250
Drive: Electric
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12
Max speed (m/min): 5, 6, 10, 11, 12, 13
Max wire storage (m): 100, 150, 250
Maintenance and testing
In addition of rental winchsystems, TWS offers the possibility of complete overhaul / maintenance of winchsystems. TWS is also capable of testing winchsystems prior or subsequent to the maintenance on our dynamic test facility. TWS has a dynamic test facility with a maximum load of 1400kN.
TRACTION WINCH SYSTEEM 40 TONS
Service according to factory specification
Dynamic load test 45 tons
Please contact for more information.
Drive: Hydraulic
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10, 11
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10, 11
TRACTION WINCH SYSTEEM 125 TONs
Complete mechanical / hydraulic overhaul
Dynamic load test 140 tons
New cable spooled under pre-tension
Please contact for more information.
Drive: Hydraulic
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10, 11, 12
Max pulling force (tons): 1, 2, 4, 5, 6, 7, 12, 20, 30
Max speed (m/min): 5, 6, 10, 11, 12